1 / 3
Zoom F-Control (FRC-8) Battery Door
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement battery door for the Zoom F-Control (FRC-8).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
This battery door was created in FreeCad using digital caliper measurements on an original Zoom FRC-8 battery door. Test prints were done using basic PLA filament. For best printing, you may need to rotate the model in your slicer. The latch is a little tight, so I suspect it could be improved slightly. It's not a serious issue, but I may update this model later to fix that if there's enough interest.