1 / 1
Tesla Model S Trunk Toyota Logo Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A curved spacer designed to mount a 100mm flat Toyota logo on the trunk of a Tesla Model S.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This curved spacer is designed to follow the exact contour of a Tesla Model S trunk, allowing you to mount a flat Toyota logo for a unique and amusing modification to your vehicle.
Parts needed
- 1x 100mm flat Toyota logo (available on AliExpress)
- Automotive-grade double-sided tape
Installation
- Clean the trunk surface thoroughly where you'll mount the spacer
- Apply automotive-grade double-sided tape to the rounded side of the spacer
- Carefully position and press the spacer onto the trunk
- Remove the backing from the Toyota logo's pre-applied adhesive
- Center and press the Toyota logo onto the flat surface of the spacer
The curved design ensures perfect fitment to your Tesla's trunk while providing a flat surface for the Toyota emblem to adhere properly.