friction fit curtain hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
only 3.03g! curtain hooks that friction fit onto the fabric without any modifications to the curtains
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 186
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
My curtain originally hanged on a flimsy thread which broke in several places. This made the curtains hang again.
The hook is made up of 2 parts: hook and key. You'd put the hook under the fabric and the key over the fabric. Then slide the key with the fabric into the hook body from the top - this might be a bit tricky depending on thickness of the fabric. When the fabric is thin enough you may get away with snapping it in. My curtain are roughly 1.2-1.6mm depending on where I measured. The default key has 0.5mm clearance with hook body, it may seem very loose but with the fabric it holds really well.
Printing stuff
- I printed them with 0.28mm layer heigh, but that probably doesn't matter much
- I used 5 perimeters for strength on hooks and 100% infill
- the key doesn't need to be that strong, so I printed the keys with 2 perimeters and 20% infill
I designed this with Onshape: https://cad.onshape.com/documents/d8417758a216f61dcefae276/w/cfcf334a6c5bd379926bc236/e/33eb7027091f30e4b832aafa?renderMode=0&uiState=68238b9cde4fa009e447015b