Bird Buddy Perch with Bird Bath and Picket Fence Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get an entire upgrade for your Bird Buddy with a perch, picket fences, and a bird bath!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
My family and I loved the perch extender and picket fence models by Willis Works, but wanted to add an option for a bird bath. The remix model of the front perch and bird bath by BiggBadaBoom was an excellent start, but we quickly realized that meant we'd lose one side of the picket fences!
This remix combines a side of the picket fence with the perch extender and bird bath so that you can have the picket fences on both sides of your Bird Buddy.
The 3MF file for download:
- Comes with custom organic supports painted on the model where they are needed (make sure supports are enabled for support enforcers only in PrusaSlicer)
- Left and Right orientations for both the fences and the perch/bird bath model
- Given this model is intended for outdoor use, I'd recommend using PETG, PCTG, or a similar material
- 0.2mm layer height (photos show the models printed on the XL with the stock 0.2mm speed profile and input shaping enabled.
- Infill can be 5%- 15% (your choice)
Two M5-.80 x 20mm Oval Machine screws worked perfectly in the stock “deck” the bird buddy comes with. These screws not only hold the fences/perch/bath in place, but do NOT allow water to leak into the food/seed area.
Small US soda bottles (12oz) will fit on the pre-threaded bird bath - the original model threads look to be based roughly on the PC-028 1810 thread model.
Looking to complete your upgrade?
Might I recommend my custom Mushroom Water Bulb for Bird Buddy Bird Bath - designed for use with this model!