LED Bar 12V for Optimill BF16
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple LED-Bar used with 12V Walladapter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
LED Bar 12V for Optimill BF16 with a 12V DC Walladapter. Mounted this 10W lightbar directly on the mounting for the safety shield (which is not useable at all…But the frame is still needed because of the included safety switch which stops the motor:-) using M4 Bolts. The led bar (200x10 mm) is mounted with M3 Brass Standoffs and M3 Bolts.
I use a 2 Amp/12V Walladpter. You can cut of the plug and solder + and - directly on the bar. Be aware that + and - connections have to be correct. You can also use these connectors: LINK
I bought all components from Banggood
Printed with Prusament PetG . The clamp needs some support.