2 small mods for phaser rifle parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(1) Small edit to sight frame to help it stay up; (2) made cap for 15 mm square tube
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Edited the sight frame file to include a small nub at the bottom . . . when the sight is tilted up, it creates a friction point to help hold it firmly upward.
Made my own small piece to use as a plug on either end of the 15 mm aluminum square tube that the model is built around. Cap one end and adhere with CA glue and activator, fill the tube with clean sand (tamp it down as you fill it so that the sand in the tube packs in as much as possible) then cap the other end of the tube with another cap. Gives the phaser rifle a nice extra heft.