Breadboard Projekt Box, slotted (no need cutting the breadboard protusions) and bottom breadboard storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlay for the rugged box, for storaging breadboard projects, this version is able to fit more breadboards
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the very cool breadboard storage inlay by Svensson2584.
I had a few ideas how to improve it, i didn't like the idea to cut up the male slot pieces on the breadboards, so i made a version with slots for them. There is one which is flush (whilst still being able to get them out afterwards, by gently flexing) and one with slots for easy extraction.
I wanted to be able to store a project down in the bottom compartment, but the original version didn't intend to put breadboards there. So i made this one which will fit breadboards in the bottom portion.
There is a middle section included, but I personally prefer not to use it in order to have more space for the breadboard project in the bottom compartment.
print settings and materials i used:
- Black Bambu PETG HF
- 0.20mm Layer Height
- three walls
- 25% infill for the box and the upper plate
- 50% infill for the interior and bottom plate