1 / 4
Gratkit Firefly Filament Dryer mount for 2020 Extrusion (XL, Voron, etc)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Securely mount a Grakit Firefly to 2020 extrusion with 2x M4x100mm studs in tension
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
BOM
- Gratkit Filament Dryer
- 2x M4x100mm Socket Head Cap bolts
- 2x M4x40mm Socket Head Cap bolts for the brace, optional
The drybox will fit snug into the base part. Brace is optional and probably not necessary. It can be used if you have a vertical extrusion underneath the part to help support it, but in my experience the base itself is plenty rigid when properly mounted and it doesn't wind up resting on the brace at all.