Seestar S50 | Accessories Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessories Box for the kit of utils create by Lordwhiteley (https://www.thingiverse.com/thing:6752376).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Accessories Box for the kit of utils create by Lordwhiteley!
Seestar Accessories Set: https://www.thingiverse.com/thing:6752376
This is one of the best accessories kit available for the Seestar S50, period!
The dew filter is a bit wider, the diffraction caps are a bit bigger, and the filter support mechanism is simple and effective. Awesome kit.
So, i needed a box to save it and keep everything organized and clean.
3 (the bigger ones) of the box placeholders can be used either for 3 filter box's or to fit the 3 parts of the kit meant for supporting the filter. For this, you must print the box with TPU, ideally with 15% infill. The box cover should be printed with TPU 15% infill as well.
My print setting:
- Elegoo Neptune 4
- TPU 15% Gyroid Infill | Normal settings | 0.15mm layers (can go to 0.25mm)
- 230º Nozzle | 50º Bed
- 50mm/s Initial layers | 80mm/s print
- Cooling @ 40%
- No supports
– @COSMONUTZ INSTAGRAM --