Conscendo Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast,…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast, so I designed this replacement. It takes the place of the stock skid.
I am pretty sure that the same skid is used on the Conscendo Advanced also. I intend to print one and try it on the Advanced.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.16 or .2
Infill:
20
Filament: Overture PLA and TPU White
Notes:
I included a screen grab of my support setting for the skid. It is printed at .16 layer height. The settings listed work pretty well on my Ender 3 pro, print the skid oriented so that the 4 pegs are on the build plate. Print with a Brim.
The two wheel pieces are joined with a 3mm x 6 screw. It should self tap into the other half of the wheel. The wheel can be printed at .2 mm layer height.A 3mm x 30mm bolt is used for the axle, using a jam nut.
The TPU wheel was printed on my Creality CR-6 w/Direct Drive.
Category: R/C Vehicles