1 / 2
3/8in Grosgrain to 1/16in Shock Cord Hook — zdjęcie 1
1 / 2

3/8in Grosgrain to 1/16in Shock Cord Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For those of you who MYOG, here's a little hook for non-load-bearing applications between webbing and shock cord!

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.

Tagi