1 / 4
Dog paw print alloy wheel centre cap 56mm (Audi/VW etc) — zdjęcie 1
1 / 4

Dog paw print alloy wheel centre cap 56mm (Audi/VW etc)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An alloy wheel centre cap in the shape of a dog's paw suitable for wheels with a centre diameter of 56mm

Ocena
0 / 5
Polubienia
6
Pobrania
79
Wydruki
0
Wyświetlenia
371
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

For all you dog lovers out there!  Here is an alloy wheel centre cap in the shape of a dogs paw.

It's designed for an Audi wheel that had a centre diameter of 56mm and the centre cap itself has an overall diameter of 68mm, however it should fit other wheels that match those dimensions.  

The two pieces have alignment holes/pegs to make sure they are perfectly central with each other and allows easy printing in 2 colours, a small amount of superglue then holds the 2 halves together.  I would recommend printing in abs or at the very least petg as your brakes do get quite hot.

If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.

I've included the f3d and step files in case anyone wants to modify my design.

Tagi