Creality Space Pi Plus Stand & Storage Unit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because bench space is valuable and in short supply, unlike your filament habit.
- Ocena
- 5 / 5
- Polubienia
- 119
- Pobrania
- 494
- Wydruki
- 1
- Wyświetlenia
- 2157
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a storage unit for the Creality Space Pi Plus. It was made via a scan of the unit with a MetroX and reverse engineered in Quicksurface Pro, hence it fits the device well.
A single M3 heat set insert and M3x6 screw and washer are required to install the handle. I also recommend adding some rubber feet, I recommend 3M SJ5007 which are great for other projects too.
This will not fit on an X1C/P1 series printer sadly. H2D and Prusa XL files are provided, as well as the un-configured 3MF.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨