Ultrahuman Ring AIR charging case (That Works)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have been in search for a charging case for my ultrahuman ring, so made a one piece solution inspired from ringbox
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
After a long search for a portable charging box, here comes the design. Snap fit and perfect close, slot wider to fit most common usbC cables. Single print with PLA. Designed in Onshape, let me know if you need a link to personalize the design. Let me know the feedback and print pictures in the comments.
Common issue i found was usb C charging slot not wide enough and box does not have a snap click closure like a ring box.
Printer - Anycubic Mega X
PLA (Black) 10% infill , 0.2mm layer , 4hr 45min print time with Brim and support (very less).
Enjoy!!