Lamp base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I started making a vase, and managed to pull the bottom of it off when removing the print from the bed....so it's a…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
So I started making a vase, and managed to pull the bottom of it off when removing the print from the bed....so it's a lamp shade now and needed a base!
This shade shown in the pictures using thing:37327 by Toussaint Jongen, minus the bottom. It's printed in Taulman Nylon 618, dyed with Rit 'Fuscia' Nylon dye.
The base can be printed in either ABS or PLA, and has a cable escape hole in the side, and a simple mount for a lamp fitting to be hot glued in place. In the pictures, the base is printed in Gold PLA at 0.15mm layer height.
Timelapse: http://youtu.be/49qzAgGCLUY
Instructions
The base can be printed in either ABS or PLA, and has a cable escape hole in the side, and a simple mount for a lamp fitting to be hot glued in place. In the pictures, the base is printed in Gold PLA at 0.15mm layer height.
Category: Decor