Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suits the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version)
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe.
I recently purchase the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version). With the probe attached to the boiler flow pipe the temperatures can be monitored with Node Red via Zigbee2Mqtt.
As the device is not provided with a mounting bracket I designed this pouch / cradle bracket for the device to sit in on the inside of the kitchen cupboard next to the boiler. I fixed it with double sided taped.
I printed it with the back on the print bed which means supports are required for the front face. However I would think it will print vertically whereby no supports will be needed.
Printed at 0.2mm with PLA.
I've included a STEP file as well as an STL so alterations, if required, will be easier.
Hope this helps someone.