1 / 5
Earring Holder - Crescent Moon and Stars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A earring holder 10 inch tall with stud and hood spacing at 1 inch apart
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
Earring holder is 10 inch tall as-drawn with 5x 10 inch crossbars. Holds 36 hooks (18 pairs) and as many studs. Great for large earrings.
I made mine on the Bambu X1C. To print on an Ender 3 or Prusa Mk 3, the project will need to be scaled 80% or lower.
All pieces can be printed without support. 0.4mm nozzle & 0.2mm layer height This is designed to be a press-fit assembly. The crossbar Z may need to be scaled slightly if the fit on your printer is too tight.
Use 2-3 walls and 25% infill for optimal results.