Magnetic Keychain Quick Disconnects (Two Sizes)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Keychain Quick Disconnects
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Magnetic Keychain Quick Disconnects in two sizes, small (3x6mm magnets) and large (3x8mm magnets).
The magnets press into the pieces but you'll still need to super glue them in, especially the side that protrudes out (modeling it this way creates a very secure connection into the recess of the other side). NOTE: I haven't printed the large size to test it yet, only the small since I don't have any 8mm magnets, so let me know if it works as good as the small size does.
PRINT SETTINGS:
Any hard filament should be fine
.2 layer height
Print extra slow, like 40 or 50mms to provide maximum layer adhesion
Supports aren't necessary but I use them for extra bed adhesion since the parts are so small
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ