Front Wheel Cap for E-Twow – Zip Tie & Clip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front wheel cap that protects bolts and safely guides the electric cable on E-Twow scooters.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed in PETG filament, oriented vertically using organic supports. This approach reduced both print time and minimized support contact surfaces.
Note: I did not include screw holes in the model. In my case, the original screws were stuck and difficult to remove, so I opted for an alternative mounting method. Instead of screws, I designed and added additional side clamps/clips at the bottom to hold the cap securely in place. I also used a zip tie through the integrated guide “gutters” to fasten it tightly.