CR6 Roller Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Spool holder for Creality CR6 SE.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I moved my spool holder to the top of my CR6, because I upgraded to Direct Drive. When using TPU, I noticed that the filament did not feed very well on the stock spool holder. I designed and printed this one, and it is working great so far.
I used these bearings: uxcell FR8-2RS Flange Ball Bearing 1/2"x1-1/8"x5/16" Shielded Chrome Bearings 4pcs: Amazon.com: Industrial & Scientific from Amazon.
The bearings were a press fit in the roller shell. Install the keeper using a 3mm x 8mm machine screw, it will self-tap into the mount.
Print the mount using a high infill and 4 walls for strength. I printed this piece using supports everywhere, twist part down. Light supports (8% support in Cura) are all that is needed.
The mount is a tight fit in the stock arm. I had to use pliers to rotate it, but it has held up nicely.