135 Film and Dia Scanning Tool

To scan your 135 negatives and dias.
Use your DSLR camera.


PRINTING
I printed this model with black PLA, layer height 0.16 mm, 3 perimeters.
The Scanning Tool and the Camera Bolt need support.


ASSEMBLY
Film Strokes
Assemble the upper and lower part of the Film Stroke Holder.
Slide the Film Stroke Holder into the Scanning Tool.

Slide the Shade in the lower grooves of the Scanning Tool.
Screw two Distance Bolts in the Scanning Tool to mount your camera to the appropiate distance to the film/dia plane.
Mount your camera to the Scanning Tool, using the Camera Bolt.
Most cameras have a tripod mount in the center of the camera. If not you can use one of the other slots of the Scanning Tool.
A tripod is advised and can be screwed to the Camera Bolt.
 

OPERATION
Film Strokes
Slide the film stroke into the Film Stroke Holder until you see the wanted picture in the frame opening.
Dias
Slide the 5 x 5 cm dia into the Scanning Tool.

Slide the Shade to the front of the camera.
If necessary print more Shades.
Aim the Scanning Tool at a bright light source. I use my laptop screen with the white picture.
Press the release button of your camera.