Lego Storage Brick plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to fill the annoying gap in the base of 4-Stud and 8-Stud Lego Storage Brick boxes.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 78
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed to fill the annoying gap in the base of 4-Stud and 8-Stud Lego Storage Bricks. As any Storage Brick owner will know, parts like technic pins, 1x? plates and MiniFig accessories can get so jammed they aren't ever coming out!
Sizing:
The plug/bung/grommet or whatever you want to call it is sized to press-insert into the hole. It requires a little pressure and shouldn't come out. However I've left a slight radius on the flange so it can be removed with one's nails if it has to be...
Problems or Changes?
If you would like me to make changes to this part, or correct/improve something, please ask.
Printing guide:
The test model, pictured, was printed from gcode generated by PrusaSlicer, on a Sovol SV06+ using PETG filament and the following settings:
Nozzle: 0.4mm, 245ºC all layers.
Bed: 85ºC first layer, 80ºC other layers.
Layers: 0.3mm first layer, 0.2mm other layers. Note: Being a simple part with a simple function, something much faster and more coarser would probably be fine!
Infill: 15% Gyroid
Supports: Not needed.
Brim: Not needed.
Edit: I feel I must mention that I only made this model because I couldn't find one like it on Printables… and now I've published it I see there are quite a few! Must have been searching really badly 🤦♂