three piece puzzle based on youtube video by Matthais Wandel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
see youtube video in description below. I made a small version based on that video to print.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this 3D printed three-piece puzzle based on the following youtube video.
“The puzzle designed to make you feel stupid” by MatthiasWandel
https://www.youtube.com/watch?v=sASwadHr11M
This puzzle prints fast as the cubes are small (~1cm cubes). I modelled the pieces in OpenSCAD and then imported the resulting stl files into Fusion to add in 0.2mm of tolerance between parts that slide together. I printed it and it works without any sanding.
Print all three pieces with support. I recommend not rotating them and 0.20 layer height. If you don't rotate the pieces, all the layer lines should line up to help solve it. Although this puzzle is only three pieces, it is more challenging than you might expect.
jackdog50 has made a version of this puzzle as well here:
https://www.printables.com/model/1101114-matthias-wandels-the-puzzle-designed-to-make-you-f
Have fun!