Stackable Hotwheels display stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand I made for Hotwheels. It should work for any 1/64 model cars. I've included files for the straight, right angled, and left angled, as well as a blank rack piece and the wheel chock if you desire to change it. Each level sits on top of the lower one with the little holes for the posts in each corner. Please post any make or remix! I love seeing your creations.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Yes
Supports:
No
.2 or .3 for speed
Infill:
I would do 10% infill
Notes:
This is a pretty large platform, but there isn't really much detail, so you can get away with low infill and lower resolution. I would advise using a raft, since my first print warped quite a bit on one of the corners. Overall, it should be a pretty easy print.
Category: Vehicles