Wingspan Resources
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of GregNetDesign's beautiful Wingspan resources in Fusion 360, with a couple changes.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 311
- Wydruki
- 5
- Wyświetlenia
- 2100
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I recreated GregNetDesign's beautiful Wingspan resources in Fusion 360, with a couple changes:
The pieces are thinner, about 1/2 the thickness of the originals (faster printing, less filament)
The grooves are deeper, making them more pronounced.
The pieces are two-sided, which most printers should handle just fine with bridging.
I designed a different "Berry" resource from scratch.
Note: because there are now grooves on the bottom as well as the top, it's extra important to have good printer settings for first layer adhesion and for bridging. A level bed, a slow first layer, and no elephant foot compensation are suggested, especially for the worm where the first layer is multiple separate pieces.