Simracing VRS Vocore 5in DDU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vocore 5in DDU for VRS base with either a direct mount or extension
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
Vocore 5in DDU for VRS base with either a direct mount or extension for setups like mine where the wheel base is behind the monitor. The extension can easily be changed via the parameters panel from the favorited parameter. Size is expressed in inches.
The Top Plate.stl is attached to the Bottom Plate.stl via magnets. The Bottom Plate.stl features wire path grooves and a slot for a 1ft USB C panel mount adapter cable. The case is assembled with heat inserts.
Heat inserts go into the Bottom Plate.stl and Bracket.stl. I put tessa tape over the left heat insert where the USB board for the Vocore screen sits to make sure the board doesn't touch the heat insert/screw. The USB C Panel mount adapter is a press fit in the Bottom Plate.stl
BOM:
| Part | Quantity | Link |
| Vocore 5in Screen | 1 | https://vocore.io/#store |
| USB C Panel mount adapter | 1ft | https://a.co/d/7ZWZejv |
| 6x3 Magnets | 12 | https://a.co/d/45pE1yW |
| M5 heat inserts | 4 | https://a.co/d/dSnuMTH |
| M5 Screws (10mm) | 4 | https://a.co/d/7NyHfj0 |
| USB C angle adapter (optional) | 1 | https://a.co/d/ecrxbX5 |