Toyota MR2 Spyder/MR-S (ZZW30) Custom Oil Funnel (VASE MODE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The solution for getting oil through the impossible-to-reach oil filling port on your MR2! (Only tested for 1ZZ-FE)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to fill up your oil without having to awkwardly hold a regular funnel or risk spilling oil everywhere, then this is a must have item. This funnel sits snugly in the filling port of your 1ZZ-FE engine while not interfering with any hoses or strut bars that might be in the way. To install the funnel you must slide it under the strut bar first and then locate the filling port. With the funnel firmly pressed inside the port you can comfortably pour your oil from any container using two hands, without needing any other accessories.
Print using vase/spiral mode. Recommended nozzle diameter 0.6mm or larger, depending on required strength. Add some part cooling and print with a relatively small layer height (around 25% of nozzle diameter) to aid with the aggressive overhang (~35°). A brim is also recommended. Model is oriented upside down for better stability during printing. Compatible with small (120mm x 120mm bed) printers!
