Prusa CORE One Toolbar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find a quick and simple holder for the tools that came with the CORE One so I decided to make one myself. Insert seven 10mmx3mm magnets (five on the back, one on each side) and it's good to go, no fancy holders or doors to print before you can mount anything. I hope Prusa didn't ship tons of variations of the screwdrivers as the little recesses are customized to the two that came with my kit, they also only fit in the same order as on my photo. The bar has a bit of wiggle room to the sides because I wanted to avoid jamming it into the sidecover.
The one in the photos was printed with Prusament PETG Matte Black on my Core One with 10% gyroid Infill and 3 perimeters using the structural profile, it needed around 40g of filament. So far I haven't heard any noises coming from the tools while the printer is running.