Transformers Autobots and Decepticons Logo Ink Stamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Positive and Negative versions of each of the most popular TF logos.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 596
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Obviously, the actual logo designs are not my creation (intellectual property) but the CAD work and modeling is mine. As such, remix to your heart's content!
I've provided both “positive” and “negative” versions of each stamp head. The handle screws onto the stamp heads, so print as many handles as you need to use however many stamps you want to use. Just one handle is enough! I recommend PLA for the handle and TPU for the stamp heads. These should all print with no need for supports, but make sure your bridging is good.
Handle_L is for large hands, while Handle is for smaller hands. If you decide to scale up the stamps, don't forget to scale up the handle by the same amount! The smaller handle would probably be the better of the two for scaling up much.
Currently, the available stamps are for Beast Wars Maximals and Predacons, original “G1” Autobots and Decepticons, as well as G2 Autobots and Decepticons. I may add more obscure TF logos in the future.
And yes, I didn't have any ink stamp pads around, so I used paint. :)