Audi or Volkswagen Roof Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits around the odd shaped bar to mount whatever you need with an M5 screw.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Audi or Volkswagen Roof Rack Mount
This model fits around the odd shape of the Audi (and possibly VW) roof rack bars. It uses two M5 heat inserts and screws to attach to the roof rack, and another insert on top to mount whatever you want. My plan is to mount holders for fishing poles and the paddle for my stand up paddle board, but you could use these to mount a roof basket or other accessories too!
Printing:
Keep it strong. 5 walls, 5 top and bottom layers, 40%-50% infill.
Use ASA or PETG to make it last in the sun.
Print parts on the side with no supports.
Assembly:
Designed for M5 (OD 7.5mm) heat inserts 8mm in length.
Use stainless steel hardware if possible. You don't want it dripping rust on your car.