Hex Drivers Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Holds the Racingirl NIDICI Titanium Hexagon Screwdriver Wrench Tool Set or similar. Solidworks and STEP files are included for remixing.
The finished assembly requires 4 M3 x 20mm screws (McMaster PN: 91292A123) and 4 3/8" adhesive backed bumpers (McMaster PN: 95495K931) if you want them.
The Case Bottom was printed out of Overture White PLA at 0.2mm layer height, 15% infill, 4 perimeters, no supports.
The Case Lid was printed out of eSun Semi-Transparent Green PETG at 0.2mm layer height, 15% infill, 4 perimeters, no supports.
The Case Latch was printed out of Overture Red PLA at 0.2mm layer height, 15% infill, 4 perimeters, no supports, 5mm brim.