Headphones holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast and easy to print headphones holder. Max width of the headphones : 4.6cm Desktop thickness range : from 2.5 to 3cm
- Ocena
- 4,857 / 5
- Polubienia
- 39
- Pobrania
- 535
- Wydruki
- 12
- Wyświetlenia
- 2600
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Headphones holder :
You can print the holder with an infill of 20% but you have to setup an infill of approx. 50% for the edge next to the screw pitch (see GCODE file if it's not clear) to increase the strength of the print. Thereby you could tighten the screw enough to fix it well. (In Cura you can add a support blocker and change the setting for overlaps.)
Screw :
If you want a stronger screw you should print it horizontal. If you prioritize the quality you should print it vertically. (By the way the horizontal is not ugly but need a little cleaning after printing.)