Headphone hanger for Secret Labs Magnus Pro Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a simple hanger for headphones. Does not require magnets or any additional hardware.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not wanting to pay for an expensive headphone hanger from SecretLabs, I decided to design and print my own.
This isn't the strongest hanger around but it gets the job done for my Arctis Pro 7's. I made the top of the hanger a wedge that slides under the desk mat for stability and a low profile. It currently resides out of the way on the corner of my desk. Currently, it's 20mm wide, for a more stable hanger I would widen it to 50mm. It will accommodate a desk that is 20mm deep in it's current configuration.
Print on it's side for strength.
No skirts or support required.
100% infill.