Ubiquiti Unfi G5 Bullet Camera 4 inch siding mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for G5 Bullet Cameras to 4 inch vinyl siding
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model wasn't the right size or had the holes for the brass inserts I needed so I remade the same idea from scratch.
You will need some 6mm deep M4 inserts. These will work with the provided M4 screws that come with the cameras.
The screws for mounting to the siding into your OSB are #8 countersunk wood screws. I ordered mine from here: https://www.mcmaster.com/90294A203/
This model is designed around 4 inch siding. If you need a larger size let me know and I can modify the model. There are also STEP file available if you want to do it yourself.
The design is also available on OnShape if you want/need more customization: https://cad.onshape.com/documents/6bb7f79e89342bdda1196754/w/c219fa44625119b2d334b37a/e/14659b9f9be05c82e3f03ba0?renderMode=0&uiState=68234f13ae71b73acefbc43e
Print in PETG or ASA so it'll withstand being outside in the sun. Do not use PLA! Print with 4 perimeters and 25% cubic infill. This worked great for me and makes them really sturdy, especially in ASA!
