1 / 1
Gas canister feet with elastic band hook
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @Yellowsoup's model for improved stability.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 2
- Wyświetlenia
- 275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (16)Powiązane
The original model was a bit too lose on my Forclaz 230g canister, so I thickened it to 150% (from 4 to 6 mm). The feet also fell out as soon as I moved or lifted the canister, so I added a hook for an elastic band that keeps them in place. See the section below for details.
A set of three pieces weighs about 7g.
The OpenSCAD source is attached, should anyone need to tweak this further. I've also added a version without the pegs that can be used as the top piece of the stack.