Large DIN Rail Prototyping Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 627
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand when used with some DIN Rails makes a useful electronic
prototyping rig. You will be able to move your prototypes easily with it. Feet
are also provided to tilt a bit the stand (15 degrees). You will find on
Thingiverse many accessories. Search for DIN Rail.
This version supports 3 Din Rails, while the previous one supports 2 Din
Rails.
M4 nuts and bolts are recommended for assembly. You will need 4 x 8 mm and 2 x
16 mm bolts if you are using the feet. Otherwise, 6 x 8 mm will be required.
You will need to print 2 of each. Minimal support material touching the plate
is needed for the rail holders. Print them upright. None is required for the
risers. An infill of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/large-din-rail-prototyping-stand/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.