Best 3D Printed Razor!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by Henson, this razor will cut fuzz and broom, skin close and no deeper!
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This razor will give you the closest shave, second only to a straight razor. It will glide over your skin cutting every hair flush with your skin. Say good bye to ingrown or pulled hairs those are things of the past.
To FDM Print: Use the smallest layer height your printer will alow, use what ever filament has the best layer addhesion and orient the largest flat face down. I was able to get fantastic results with my Ender 3
To Resin Print: Any resin should work as long as it is somewhat stable in water. Give each part a 30 degree tilt in the x direction and 10 in the y. The more support the better but avoid putting support too close to the cutting edge. good luck with the handle…
Good blades to use:
https://www.amazon.com/s?k=astra&crid=2T7646DNSPHS4&sprefix=astra%2Caps%2C170&ref=nb_sb_noss_2
If you are interested in modifying the design you suit you specificaly the onshape file is linked below: