Freerunner V2 - Buffer Tube Stock Upper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a buffer tube stock attachment point to the Freerunner V2 Nerf blaster.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 693
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
----------------------------------------------------------------------------------------
Description
----------------------------------------------------------------------------------------
This is a new upper for the Freerunner v2 which allows you to use buffer tube stocks on the blaster.
It works great as a little carbine thing (especially when used in conjunction with my extended front end (https://www.printables.com/model/1294786-freerunner-v2-extended-muzzle-front-end-with-picat)), and I love it :)
----------------------------------------------------------------------------------------
Hardware Needed
----------------------------------------------------------------------------------------
The only hardware needed is:
- 11x m3x14mm socket head screws
----------------------------------------------------------------------------------------
The 3dp Parts
----------------------------------------------------------------------------------------
The only parts changed VS a normal Freerunner v2 are:
- Upper
The two new parts added:
- BufferTubeBottom
- BufferTubeTop
----------------------------------------------------------------------------------------
Printing
----------------------------------------------------------------------------------------
All parts are exported in the correct orientations.
Print ALL these parts with 7 walls for strength.
- Upper_BufferTube: The top of this piece goes on the build plate. Put supports on the ledge that the buffer tube attaches to.
- BufferTube_Bottom: Put supports on the ledge that attaches to the Upper.
- BufferTube_Top: No supports needed, except maybe near the floating screw access hole on the front end.
Print ALL these parts with 7 walls for strength.
----------------------------------------------------------------------------------------
Misc.
----------------------------------------------------------------------------------------
If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!
Thanks to Chance for help with my Freerunner V2 build. Also, he hates that I've made the FRv2 into a carbine. lol, lmao even.
The photo of me using this Freerunner V2 at Maryland Mayhem 2025 was shot by Dart Sweep!
China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.
Disclaimer: This is not a toy. This blaster is meant for hobbyists, not children. Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on this blaster. Consult local laws before building this high powered blaster.
Changelog:
- 5-13-2025: Release