Photo frame / Exhibition frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frames with mounting options for rods, wall mount, IKEA Skådis pegboard and a foot for standing on a table / shelf.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
A frame with mounting options for rods used at exhibitions, wall mount, IKEA Skådis pegboard and a foot for standing on a table/shelf.
Available versions:
| Photo size | Frame size |
| 3 x 5 inch - 76x127mm | 96x147mm |
| 4 x 6 inch - 102x152mm | 122x172mm |
| 5 x 7 inch - 127x178mm | 147x198mm |
| 120x180mm | 140x200mm |
| 148x210mm | 168x230mm |
The table stand foot can be attached either for portrait or landscape orientation using a short strand of filament (ø1.75mm).
The IKEA Skådis hook is also mounted with a strand of filament.
The rod hooks are just pushed into loops, these only support landscape mounting.
Frame with label variant
The frame files with names that ends with label_support have 2 holes for alignment of a label on the lower side of the frame. This is done to make it easier to align and attach a label with embossed text. The label can be attached with a piece of thin double sided tape to allow changing the label later.
The label has two pegs that aligns with the holes in the frame. Use the Slicer to add the text to the label.
The pegs under the label requires that you add supports from the build plate.
Print settings:
Prints nicely with both 0.4 mm and 0.6 mm nozzle.
I use the standard settings and print with the 0.25mm layer height speed profile as I didn't notice any quality difference from the front side when reducing layer height and speed.
The labels, if used, needs to be printed with supports from the build plate.