1 / 4
Simple Polygonal Pill Box
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple polygonal screwtop pill box I created as I was playing around with new techniques in Fusion360. It printed out quite well, so I thought I'd share it.
I was mainly playing around with 3d printed threads, particularly dialling in tolerances on the threads. As such, there are different versions in the files section with 0.2mm and 0.3mm tolerances. I found that with my printer, 0.3mm resulted in too much ‘slop’ in the thread & the lid could screw on past its designed alignment point. The 0.2mm tolerance worked perfectly for me. If there is any interest, I can alter them more.