Jaguar XJS (others) Cigarette lighter USB replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this to replace the original cigarette lighter base as the base kept popping out of the wood ski jump. Uses…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I made this to replace the original cigarette lighter base as the base kept popping out of the wood ski jump. Uses this led holder: https://www.amazon.com/your-orders/search/ref=ppx_yo2ov_dt_b_search?opt=ab&search=led+socket and these screws, https://www.amazon.com/dp/B00GDYDMMU?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_24 or similar if not available. Print viewable side down for the main body, brackets with holes pointing up. I printed it with ABS as it sits in the sun. 20% infil. The hole is 30mm to fit the newer sytle USB type chargers. I lowered the led by 1mm from what is in the picture. You will have to cut and resolder your led to make it work as the original...standard 5mm led fits the holder.
Category: DIY
