1 / 1
Jaguar XJS ashtray replacement-phone holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this as I don't smoke, and would rather have a phone holder than two ashtrays...so here is what I came up with.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I made this as I don't smoke, and would rather have a phone holder than two ashtrays...so here is what I came up with. Works good. You'll have to cut some of the excess carpet under it to get the clearance you'll need. It's stepped to clear the metal frame. L or R , its the same print. Print with supports upright as used. I did it at 30% infil. Use a UV resistant filament , I used ABS.
Category: Other