1 / 1
Right angle corners for the 3D photo dolly jig — zdjęcie 1

Right angle corners for the 3D photo dolly jig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Right angle corner connectors to connect both rails on the left and right to provide more stability and hide sharp edges

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You need to 3d print 4x corner connectors.

You are going to need to cut 2x Makersbeams to a length of 100mm each, and then attach the 3d printed connectors to these beams and then attach the Makerbeams to the rails.

The Maker beams can be easily cut with a hacksaw, if you don't have any power tools; sand the edges with sandpaper to remove any burrs.

The corner connectors are a tight fit, so if it's too tight or loose for you, then adjust the scale of the 3d model slightly in your Slicer to suit your specific 3d printer, if that is necessary.

That's it, enjoy.

Tagi