On Stage XCG4 Guitar Stand Strap Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Really tired of the rubber strap breaking? Print one!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I got really, really tired of the short service life of the little rubber strap that holds your axe in the stand. I finally decided to print one up, and in the process improved my original printed design a little: the version here holds the “strap” component up and out of the way so you don't scratch your finish pulling the git out of the stand.
The stands I have here are On Stage XCG4 models, vintage 2013. Maybe they've changed, I dunno - print one and see before you print a dozen.
I printed the individual pieces flat on the bed, no support, with PETG. The plug has the small end pointing skyward. The other two parts are just flat.
You'll keep one of the two original plugs for the strap to hitch on to.
Assembly order of the strap pieces from frontmost to back is Plug, Strap, Washer, Stand.
The fit of the plug should be secure enough on the stand to keep it, but loose enough that you can adjust the “open” strap position by rotating it with a little force without loosening things up too much.