1 / 5
McPrue Apollo S 4.0 - Bottom Mount External Radiator Manifold Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for a valved-bypass manifold for optional external water cooling component connections
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Housing for a valved-bypass manifold for optional external water cooling component connections, for the McPrue Apollo S V4.0 computer case.
Parts to print
Printed in Polylite ASA but PLA/PETG should be fine too.
- Main Body
- Mobo-side retainer plate
- Radiator-side retainer plate
- (optional) Filler for the original lower grille
Watercooling components
BOM for the internal water-cooling components. Note this only includes the main elements that connect to the manifold, you will need additional QDCs and fittings for the rest of your loop.
| Item | Qty |
| Alphacool G1/4 Check Valve - Black (29046) | 1 |
| Barrow G1/4 Female to Female Manual Inline Valve - Black/Black (TTLPF) | 1 |
| Barrow G1/4" 10mm Male to Female Extension Fitting - Black (TNYZ-G10) | 3 |
| Alphacool G1/4 Male to Male 5mm Extension - Black (17037) | 3 |
| Alphacool Low Profile ES L-Connector Rotary G1/4 OT - G1/4 IT - Deep Black (17578) | 2 |
| Alphacool Eiszapfen Connection Terminal 4-way G1/4 IT - Black Acetal (17557) | 2 |
| QD3 Male Quick Disconnect No-Spill Coupling, Male Threaded G 1/4 BSPP \*Black\* (QD3-MSG4-BK) | 1 |
| QD3 Female Quick Disconnect No-Spill Coupling, Male Threaded G 1/4 BSPP \*Black\* (QD3-FSG4-BK) | 1 |
| M3 Screw/Washer/Nut asst - button or socket head | 1 |
| M3 nylon lock nuts (optional) | 1 |
Assembly Notes
- Use the OEM screws for the filler-panel
- You can set either side up as the “inlet” or “outlet” to the internal loop, just make sure you plan that in advance
- Primary cooling component order (clockwise using the direct bottom-view photo, starting upper-right)
- QDC #1
- AC 4-way Terminal
- Use a plug for the bottom port
- M/M 10mm extension on the top port entering the case
- M/M 5mm extension
- F/F Check-Valve (ensure the orientation matches your intended flow direction)
- M/F 10mm extension
- M/F Rotary L-Connector
- M/M 5mm extension
- M/F Rotary L-Connector
- F/F Manual Inline Valve
- M/M 5mm Extension
- AC 4-way Terminal
- Use a plug for the bottom port
- M/M 10mm extension on the top port entering the case
- QDC #2
- Leak-test before installation
- Both valve positions
- Verify check-valve operation is what you expect
- Test from the QDC ports as well as from the internal-facing ports
- Tip: When using QDCs, make yourself a rule to use either M or F connectors as your inlet, and stick to that with your external components as well. Reduce the risk of re-connecting something like an external pump flowing against your internal loop.