Volvo S40 Handbrake Mechanism Replacement | partnumber 205032
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handbrake mechanism for Volvo S40 (2008), fits original button and restores full functionality.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a replacement mechanism for the handbrake of a 2008 Volvo S40. It replaces the original part number 205032, which had broken in my car, leaving the handbrake non-functional. After designing and printing this part, I was able to fully restore the handbrake’s functionality.
To install it, you’ll need to remove the handbrake cover, after which the old part can be swapped out for this printed version. The original handbrake button fits perfectly on this model, maintaining the stock look and feel. While it was specifically designed for a 2008 S40, it may also fit other Volvo models or model years that use the same mechanism.
For optimal strength, the model should be rotated 45 degrees on the Y-axis before printing—this orientation aligns the layer lines to best handle the stress it will be under. See attached photos.
This part brought my handbrake back to life, and I hope it does the same for yours.
Please leave a like, and I'm curious to see your make!