1 / 4
Led strip angled roof mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is amount for LED strip to the angled ceiling in the atic.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Description
Plastic holders for a led strip. They are meant to hold a wooden(or other material) bar that supports a LED strip which is facing upwards. I did not want direct light from LEDs because of the low ceiling. It is made for a bar width of 2 cm.
They are designed for a 40 degree roof angle, with holes for M4 bolts. Use more walls when printing if you need to drill out bigger holes for larger bolts.
Print settings
- Layer height 0.2 or 0.26
- Nozzle 0.4
- No supports
- 20% infill (less should be fine)
- Printed in PETG for a bit of flexibility if house shifts a bit (PLA should be ok)
- 3 outer walls
I printed this on Ender 3 S1 Pro.