Anycubic Kobra 3 PSU Cover Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anycubic Kobra 3 PSU Cover Mod - 2 Versions available
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Anycubic Kobra 3 PSU Cover Mod
Two Versions available
1. With Circular vent Pattern
2. With Polygon Pattern
Note:
The polygon pattern is much quieter but the Circular pattern has more structural strength.
The Polygon pattern has the PSU Screw mounts a bit wider to accommodate M3 threaded inserts, but the circular pattern is just a perfect fit for M3 screws to be used directly.
Preparation:
The part has a 2.5 mm thick wall which prevents it from sliding in to the case as the clips on PSU side interfere. In order for the part to fit, it needs to be bent outwards a little bit with the help of tweezers.
Features:
Added mount points for LM2596 (Need M2 Threaded inserts).
Comments:
Original PSU FAN has been used but if you want you can use any off the shelf Fan (6015) for an even quieter PSU.
No special print parameters have been used. It has been printed with .4mm Nozzle @ .2mm resolution using Generic Kingroon PETG (HCGS016) BLACK Filament.
This mod does not require the 3D printer to be raised off - Plug and play model