1 / 7
Card wallet | slim profile, with card lock and color customizable NEED ASSEMBLY — zdjęcie 1
1 / 7

Card wallet | slim profile, with card lock and color customizable NEED ASSEMBLY

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Card wallet with low profile, your card won't fall out, perfect with color combination. NEED ASSEMBLY

Ocena
0 / 5
Polubienia
8
Pobrania
34
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike


🔍 Specifications

  • Low and thin profile.
  • lip to prevent the cards from coming out.
  • Easy to print.
  • Just a little glue to assemble it.
  • Design thought for a double color.
  • Customizable with your own writing (leave a comment to request it).

⚙ Print settings

  • Orientation: as file
  • Layer: 0.2mm
  • Supports: COLOR1 no supports, COLOR2 only here with 5mm brim 🔽
  • Material: PLA

📦 Materials

To assemble your wallet, you will need some super glue or standard UHU all-purpose glue. I used a non-original brand and it worked perfectly.

I chose to assemble it because I think the end result is better with the correct print orientation than with a print-in-place solution.

🔩 Assembly process

The assembly process is really quick and simple (2 minutes). Don't be put off by the number of steps. They are included to make the process as clear as possible.

  1. Remove all the supports and brim from the parts (needed only on part [4]).
  2. Apply some UHU all-purpose glue (or a similar product) to the edge of the larger part [1], as shown in the GIF below.
  3. Close the wallet with the other large piece [2] and leave it to dry overnight.
  4. Insert the inner part [3] from the top and align the square hole with the round one.
  5. Align the lever [4] and press it into the square hole. It is designed to be pressed in, so you will need to apply some force. (If it is loose, add some glue to the border, taking care not to spill any outside)
  6. Use some superglue to glue the cash holder in place on the other side of the wallet.
  7. And you're all set!

✨ Custom writing

If you need custom writing like the Alice photos, don't hesitate to leave a comment, I'll share it!

Tagi