1 / 3
Rotring Pilot G2 800+ Ratio
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotring style body for Pilot G2 refills. Rotating extend & retract mechanism. Replacement body for my chewed up G2 pens.
- Ocena
- 5 / 5
- Polubienia
- 208
- Pobrania
- 421
- Wydruki
- 3
- Wyświetlenia
- 9022
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 12)Remiksy (1)Kolekcje (263)Powiązane
I love Pilot G2 pens, but I also love Rotring mechanical pencils and industrial design. Since I chew my pens (I know gross) I needed a replacement body/holder for my unfinished G2 cartridges/refills. Thus this pen was born; merging Rotring design and twist extend/retract mechanism with my favorite ink! Styled like a Rotring 800+ scaled to the width of a vintage Rotring 600 Fountain Pen.
Hardware Required:
- 1X M2 x 20 Bolt
- 1X M2 Heat-press Insert
- 2X M2 Nut
- Pilot G2 Spring & Cartridge
Print Settings:
- 0.05-0.07 Layer Height
- >20% infill
- 3+ shells
Assembly Instructions:
- Press heat insert threads into the knob from the underside (opposite of the thin cylindrical protrusion)
- Press M2 nut into hexagonal section of the plunger
- Thread M2 bolt from the opposite end of the plunger until tight
- Lock the M2 nut in place with a second M2 nut
- Thread plunger assembly into knob from the underside (same side as the heat insert was pressed into
- Press knob & plunger subassembly onto the body (opposite side of the threads/snap fit)
- Toss G2 spring and body into the grip
- Thread grip subassembly onto the body subassembly
- Twist the knob counter clockwise to extend the point, clockwise to retract! (next iteration make this less annoying to do, too many turns!)
- ENJOY!